Asus Pedestal Server TS100-E4/PI2 User Manual Download Page 148

Page: 148 / 158

6-14

Chapter 6: Driver installation

6.2.2 Red Hat

Enterprise ver. 3.0

Follow these instructions when installing the Broadcom

Gigabit LAN control-

ler base driver for the Red Hat

Enterprise ver. 3.0 operating system.

Building the driver from the TAR file

4. Click Next

when the InstallShield Wizard window appears. Follow screen

instructions to continue installation.

To build the driver from the TAR file:
1. Create a directory and extract the TAR files:

tar xvzf bcm5700-<version>.tar.gz

2. Build the driver bcm5700.o as a loadable module for the running kernel:

cd bcm5700-<version>/src

make

3. Test the driver by loading it:

insmod bcm5700.o

4. Install the driver and man page:

make install

5. Refer to Red Hat distribution documentation to configure the network

protocol and address.

Install first the Kernel Development tools before building the driver from

the TAR file.

Summary of Contents for Pedestal Server TS100-E4/PI2































































































































































Search results

Summary of Contents for Pedestal Server TS100-E4/PI2

Reviews:

Related manuals for Pedestal Server TS100-E4/PI2

Brands by name

Popular brands

Asus Pedestal Server TS100-E4/PI2, User Manual

Search results

Summary of Contents for Pedestal Server TS100-E4/PI2

Reviews:

Related manuals for Pedestal Server TS100-E4/PI2

Brands by name

Popular brands