Asus Pedestal Server TS100-E4/PI2 User Manual Download Page 112

Page: 112 / 158

5-12

Chapter 5: RAID Configuration

5.3 LSI Logic Embedded SATA RAID Set-

up Utility

The LSI Logic Embedded SATA RAID Setup Utility allows you to create RAID 0

or RAID 1 set(s) from SATA hard disk drives connected to the SATA connec-

tors supported by the motherboard Southbridge chip.

You may also create a RAID set(s) in a Windows

operating environment

using the Global Array Manager (GAM) application. Refer to the GAM user

guide in the motherboard support CD for details.

To enter the LSI Logic Embedded SATA RAID Setup Utility:
1. Turn on the system after installing all the SATA hard disk drives.
2. During POST, the LSI Logic Embedded SATA RAID Setup Utility auto-

matically detects the installed SATA hard disk drives and displays any

existing RAID set(s). Press <Ctrl> + <M> to enter the utility.

The LSI Logic Embedded SATA RAID automatically configures a RAID 1

(Mirrored) set when the SATA is configured as

RAID in the BIOS and you

installed two hard disk drives without a RAID configuration.

Summary of Contents for Pedestal Server TS100-E4/PI2































































































































































Search results

Summary of Contents for Pedestal Server TS100-E4/PI2

Reviews:

Related manuals for Pedestal Server TS100-E4/PI2

Brands by name

Popular brands

Asus Pedestal Server TS100-E4/PI2, User Manual

Search results

Summary of Contents for Pedestal Server TS100-E4/PI2

Reviews:

Related manuals for Pedestal Server TS100-E4/PI2

Brands by name

Popular brands