Asus PCI-DA2100 User Manual Download Page 78

Page: 78 / 78

ASUS PCI-DA2000 Series RAID Controllers Driver Installation

A. Text RAID Manager / RS-232

A. RAID Manager

erminal Interface

Terminal Operation Command Reference

Quick Installation

Quick Set-Up Function

View and edit logical drives
View scsi drives

View drives assigned to a logical drive.

Add stand-by drives

Assign a spare drive to a logical drive.

Delete logical drive

Delete a logical drive.

Partition logical drive

Divide a logical drive into up to 8
partitions.

view and edit scsi id Map

View and edit scsi id Map

view and edit scsi drives

View and edit available drives

Scan new scsi drive

Include a newly installed drive into an
existing list.

Rebuild logical drive

Initiate data rebuilding.

view and Edit scsi channels

View and edit available SCSI channels

scsi Id

Set SCSI channel ID number.

scsi Terminator

Enable or disable SCSI channel active
termination.

Sync transfer clock

Change Sync transfer clock

Wide transfer

Enable or disable wide transfer

system Functions

Mute Beeper

Turn beeper off.

Write Back Cache

Enable or disable write back caching.

Scsi Motor Spin-Up

Enable or disable the staggered spin-up
of connected drives.

Scsi Reset at Power-Up

Enable or disable reset of SCSI channels
during power-up.

Monitor Port Baud-Rate

Set serial port baud rate.

Total Cache Size

Display the total cache size

Firmware Version

Display the firmware version

Bootrecord Version

Display the bootrecord version

Serial Number

Display the controller serial number

CPU Type 80486SX-33

Display the CPU type

Change Password

Set or change password.

Modem Control

Set up modem parameters.

Reset Controller

Reset the controller

Controller Maintenance

Download/Upload controller Firmware
through the Text RAID Manager.

NOTE: RS-232 Terminal Operation is not available on the ASUS PCI DA-2100.

Summary of Contents for PCI-DA2100















































































Search results

Summary of Contents for PCI-DA2100

Reviews:

Related manuals for PCI-DA2100

Brands by name

Popular brands

Asus PCI-DA2100, User Manual

Search results

Summary of Contents for PCI-DA2100

Reviews:

Related manuals for PCI-DA2100

Brands by name

Popular brands