Asus PCI-DA2100 User Manual Download Page 44

Page: 44 / 78

ASUS PCI-DA2000 Series RAID Controllers Driver Installation

2. RAID Manager & Interface

2. RAID Manager

Rebuild Logical Drive

2.8.

Rebuild Logical Drive

Go to Main Menu.

Type R or use the keys to select “Rebuild logical drive” and press [Enter].

The controller will check for a spare drive and display the failed drive informa-
tion.

Found Lg_Drv 0 Channel 1 ID 2 Failed

Rebuild?

Yes

To initiate rebuilding, press Y or use the

keys to select “Yes” and press

[Enter].

Step 4 will automatically repeat for any other logical drives that needs rebuild-
ing.

Quick installation
View and edit Logical Drives
view and edit SCSI ID Map
view And edit SCSI drives
Scan New SCSI drive
Rebuild logical drives
view and Edit SCSI channels
system Functions

Summary of Contents for PCI-DA2100















































































Search results

Summary of Contents for PCI-DA2100

Reviews:

Related manuals for PCI-DA2100

Brands by name

Popular brands

Asus PCI-DA2100, User Manual

Search results

Summary of Contents for PCI-DA2100

Reviews:

Related manuals for PCI-DA2100

Brands by name

Popular brands