Asus PCI-DA2100 User Manual Download Page 76

Page: 76 / 78

ASUS PCI-DA2000 Series RAID Controllers Driver Installation

8. SCO Unix Driver Installation

You will be prompted to insert the DA2000 Series BTLD diskette after a series
of messages as follows:

Please insert the fd(x)pcida volume and press <RETURN>

or ‘q’ to quit:

After Insert the diskette, press [Enter].

Follow the appropriate SCSI manual to install the SCO UNIX from the installa-
tion media (floppy, tape, or CD-ROM).

A message similar to the following will be displayed:

Please insert the pcida volume and press <ENTER>:

Insert the ASUS BTLD diskette again and press [ENTER]

At the following prompt, type “y”:

The BTLD packages will now be added to the Link Kit.

The Link Kit is not installed.

Do you wish to install it now?(y/n)

8. SCO Unix

Installation

Summary of Contents for PCI-DA2100















































































Search results

Summary of Contents for PCI-DA2100

Reviews:

Related manuals for PCI-DA2100

Brands by name

Popular brands

Asus PCI-DA2100, User Manual

Search results

Summary of Contents for PCI-DA2100

Reviews:

Related manuals for PCI-DA2100

Brands by name

Popular brands