ASUS PCI-DA2000 Series RAID Controllers Driver Installation
61
6. Windows 95 Driver Installation
6. Windows 95 Driver Installation
The following files are supplied for driver installation, they are put in the \WIN95
subdirectory for Windows 95.
-DA2000.MPD:
ASUS PCI-DA2000 Series family Miniport Driver for Windows
95.
-DAW95.INF :
Information file for driver installation.
6.1.
Installing Windows 95 and the driver
1
Use ASUS PCI-DA2000 Series BIOS Configuration Utility to disable ISA Mail-
box Emulation Mode (default is disabled). To do this, at system bootup, press
[Ctrl-I], select Configure Card option, then change IO Port Address to DIS-
ABLED.
2
Use ASUS Text RAID Manager or RS-232 Terminal Interface to configure Logi-
cal Drives and SCSI Devices and map them to valid SCSI-IDs/LUNs.
Note that SCSI ID 7 is reserved for the ASUS PCI-DA2000 Series controller
and thus no logical drives or devices should be mapped to this SCSI ID.
3
Follow the instructions in Windows 95 installation documentation to install
Windows 95.
4
When Windows 95 installation is complete, restart Windows 95.
5
Click on the “Start” button on the task bar of Windows 95.
6
Select “Settings”, and then click on “Control Panel”.
7
Double-click on the “System” icon, then click on “Device Manager” tab.
8
Click on the plus sign next to the “Other devices” icon, then Double-click on the
yellow question mark labelled “PCI SCSI Bus Controller” icon, then click on
the “Driver” tab.
9
In the Driver tab, click on “Change Driver”. When asked to select hardware
type, select “SCSI Controllers”.
6. W
indows 95
Installation
