Asus P8Z68-V PRO User Manual Download Page 41

Page: 41 / 146

ASUS P8Z68-V PRO

2-23

Chapter 2

Marvell

Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_E1/E2 [navy blue])

These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0

Gb/s signal cables.

• The SATA6G_E1/E2 (navy blue) connectors are for data drives only. ATAPI device is

not supported.

• You must install Windows

XP Service Pack 3 or later versions before using Serial ATA

hard disk drives.

• When using NCQ, set the

Marvell Storage Controller

item in the BIOS to [Enabled].

Refer to section 3.5.6 Onboard Devices Configuration for details.

USB 3.0 connector (20-1 pin USB3_34)

These connectors are for the additional USB 3.0 ports, and complies with the USB 3.0

specificaton that supports up to 480 MBps connection speed. If the USB 3.0 front panel

cable is available from your system chassis, with this USB 3.0 connector, you can have

a front panel USB 3.0 solution.

You can connect the ASUS front panel USB 3.0 bracket to this connector to obtain the front

panel USB 3.0 solution.

Summary of Contents for P8Z68-V PRO



















































































































































Search results

Summary of Contents for P8Z68-V PRO

Reviews:

Related manuals for P8Z68-V PRO

Brands by name

Popular brands

Asus P8Z68-V PRO, User Manual

Search results

Summary of Contents for P8Z68-V PRO

Reviews:

Related manuals for P8Z68-V PRO

Brands by name

Popular brands