Asus P8Z68-V PRO User Manual Download Page 43

Page: 43 / 146

ASUS P8Z68-V PRO

2-25

Chapter 2

IEEE 1394a port connector (10-1 pin IE1394_1; IE1394_2)

These connectors are for an IEEE 1394a port. Connect the IEEE 1394a module cable

to this connector, then install the module to a slot opening at the back of the system

chassis.

Never connect a USB cable to the IEEE 1394a connector. Doing so will damage the

motherboard!

The IEEE 1394a module is purchased separately.

Digital audio connector (4-1 pin SPDIF_OUT)

This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port(s).

Connect the S/PDIF Out module cable to this connector, then install the module to a

slot opening at the back of the system chassis.

The S/PDIF module is purchased separately.

Summary of Contents for P8Z68-V PRO



















































































































































Search results

Summary of Contents for P8Z68-V PRO

Reviews:

Related manuals for P8Z68-V PRO

Brands by name

Popular brands

Asus P8Z68-V PRO, User Manual

Search results

Summary of Contents for P8Z68-V PRO

Reviews:

Related manuals for P8Z68-V PRO

Brands by name

Popular brands