Asus P8B WS Manual Download Page 88

Page: 88 / 148

3-12

Chapter 3: BIOS setup

VCCSA Voltage [Auto]

Allows you to set the VCCSA voltage. The values range from 0.77V to 1.60V with a

0.01V interval.

CPU PLL Voltage [Auto]

Allows you to set the CPU PLL voltage. The values range from 1.20V to 2.20V with

a 0.01V interval.

Load-Line Calibration [Auto]

Load-line is defined by Intel VRM spec and affects CPU voltage. The CPU working

voltage will decrease proportionally to CPU loading. Higher load-line calibration

would get higher voltage and better overclocking performance, but increase the

CPU and VRM thermal. Configuration options: [Auto] [Disabled] [Enabled]

The actual performance boost may vary depending on your CPU specification.

CPU Spread Spectrum [Auto]

[Auto]

Automatic configuration.

[Disabled]

Enhances the BCLK overclocking ability.

[Enabled]

Sets to [Enabled] for EMI control.

Summary of Contents for P8B WS





















































































































































Search results

Summary of Contents for P8B WS

Reviews:

Asus P8B WS, Manual, Page: 88 / 148

Search results

Summary of Contents for P8B WS

Reviews: