Asus P5Q SE R User Manual Download Page 69

Page: 69 / 162

ASUS P5Q SE/R

4-5

To update the BIOS using EZ Flash 2:

1. Visit the ASUS website (www.asus.com) to download the latest BIOS file for

the motherboard.

2. Save the BIOS file to a floppy disk or a USB flash disk, then restart the

system.

4.1.3

ASUS EZ Flash 2 utility

The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go

through the long process of booting from a floppy disk and using a DOS-based

utility. The EZ Flash 2 utility is built-in the BIOS chip so it is accessible by pressing

<Alt> + <F2> during the Power-On Self Tests (POST).

(2) Enter BIOS setup program. Go to the

Tools

menu to select

EZ Flash2

and press <Enter> to enable it.

You can switch between drives by pressing <Tab> before the correct file

is found. Then press <Enter>.

4. When the correct BIOS file is found, EZ Flash 2 performs the BIOS update

process and automatically reboots the system when done.

3. You can launch the EZ Flash 2 by two methods.

(1)

Insert the floppy disk / USB flash disk that contains the BIOS file to the

floppy disk drive or the USB port.

Press <Alt> + <F2> during POST to display the following.

• This function can support devices such as USB flash disk, or floppy disk

with

FAT 32/16

format and single partition only.

• Do not shut down or reset the system while updating the BIOS to prevent

system boot failure!

ASUSTek EZ Flash 2 BIOS ROM Utility V3.24

Current ROM

Update ROM

Note

FLASH TYPE:

MXIC 25L8005

PATH:

C:\

BOARD:

P5Q SE/R

VER:

0315

(H:00 B:13)

DATE:

06/25/2008

BOARD:

Unknown

VER:

Unknown

DATE:

Unknown

[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [B] Backup [Esc] Exit

Summary of Contents for P5Q SE R



































































































































































Search results

Summary of Contents for P5Q SE R

Reviews:

Related manuals for P5Q SE R

Brands by name

Popular brands

Asus P5Q SE R, User Manual

Search results

Summary of Contents for P5Q SE R

Reviews:

Related manuals for P5Q SE R

Brands by name

Popular brands