Asus P5Q SE R User Manual Download

Page: 18 / 162

1-2

Chapter 1: Product Introduction

1.3

Special features

1.3.1

Product highlights

Green ASUS

This motherboard and its packaging comply with the European Union’s Restriction

on the use of Hazardous Substances (RoHS). This is in line with the ASUS vision

of creating environment-friendly and recyclable products/packaging to safeguard

consumers’ health while minimizing the impact on the environment.

Intel

Core™2 Extreme / Core™2 Quad /

Core™2 Duo CPU support

This motherboard supports the latest Intel

Core™2 processor in the LGA775

package and Intel’s 45nm multi-core processors. With the new Intel

Core™

microarchitecture technology and 1333/1066/800 MHz FSB, the Intel

Core™2 is

one of the most powerful and energy efficient CPUs in the world. See page 2-6 for

details.

Intel

P45 Chipset

The Intel

P45 Express Chipset is designed to support dual-channel DDR2

1066/800/667MHz architecture, 1333/1066/800 FSB (Front Side Bus), PCIe

2.0, and multi-core CPUs. It supports Intel Fast Memory Access technology that

significantly optimizes the use of available memory bandwidth and reduces the

latency of the memory accesses.

PCI Express 2.0 support

The motherboard supports the latest PCI Express 2.0 devices for double speed

and bandwidth which enhances system performance.See page 2-20 for details.

FSB 1600 support

ASUS’s exclusive overclocking design now unleashes the ultimate potential of the

Intel

Core™2 processor. With the new Intel 45nm micro-architecture technology

and FSB 1600 / 1333 / 1066 / 800 MHz, this motherboard allows you to enjoy the

latest technology supported by one of the most powerful and energy efficient CPUs

in the world.

Serial ATA 3Gb/s technology

This motherboard supports the hard drives based on the Serial ATA (SATA)

3Gb/s storage specification, delivering enhanced scalability and doubling the bus

bandwidth for high-speed data retrieval and saves.

Summary of Contents for P5Q SE R



































































































































































Search results

Summary of Contents for P5Q SE R

Reviews:

Related manuals for P5Q SE R

Brands by name

Popular brands

Asus P5Q SE R, User Manual

Search results

Summary of Contents for P5Q SE R

Reviews:

Related manuals for P5Q SE R

Brands by name

Popular brands