Asus P5Q SE R User Manual Download

Page: 55 / 162

ASUS P5Q SE/R

2-31

12. ATX power connectors (24-pin EATXPWR, 4-pin EATX12V)

These connectors are for ATX power supply plugs. The power supply plugs

are designed to fit these connectors in only one orientation. Find the proper

orientation and push down firmly until the connectors completely fit.

P5Q SE/R

P5Q SE/R ATX Power Connector

EATXPWR

+3 Volts

Ground

+5 Volts

Ground

Power OK

+5V Standby

+12 Volts

+3 Volts

-12 Volts

Ground

PSON#

Ground

+12 Volts

+3 Volts

-5 Volts

+5 Volts

Ground

ATX12V

GND

+12V DC

GND

+12V DC

•

For a fully configured system, we recommend that you use a power supply

unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version)

and provides a minimum power of 400 W.

• Do not forget to connect the 4-pin EATX12V power plug; otherwise, the

system will not boot.

• Use of a PSU with a higher power output is recommended when

configuring a system with more power-consuming devices. The system

may become unstable or may not boot up if the power is inadequate.

• If you are uncertain about the minimum power supply requirement for your

system, refer to the

Recommended Power Supply Waltage Calculator

at http://support.asus.com/PowerSupplyCalculator/PSCalculator.

aspx?SLanguage=en-us for details.

Summary of Contents for P5Q SE R



































































































































































Search results

Summary of Contents for P5Q SE R

Reviews:

Related manuals for P5Q SE R

Brands by name

Popular brands

Asus P5Q SE R, User Manual

Search results

Summary of Contents for P5Q SE R

Reviews:

Related manuals for P5Q SE R

Brands by name

Popular brands