ASUS P5Q SE/R
A-3
A.3
Intel
®
Hyper-Threading Technology
Using the Hyper-Threading Technology
To use the Hyper-Threading Technology:
1. Install an Intel
®
Pentium
®
4 CPU that supports Hyper-Threading Technology.
2. Power up the system and enter the BIOS Setup. Under the Advanced Menu,
ensure that the item
Hyper-Threading Technology
is set to [Enabled].
The BIOS item appears only if you installed a CPU that supports
Hyper-Threading Technology.
3. Restart the computer.
• The motherboard supports Intel
®
Pentium
®
4 LGA775 processors with
Hyper-Threading Technology.
• Hyper-Threading Technology is supported under Windows
®
Vista/XP/Linux
2.4.x (kernel) and later versions only. Under Linux, use the Hyper-Threading
compiler to compile the code. If you are using any other operating systems,
disable the Hyper-Threading Technology item in the BIOS to ensure system
stability and performance.
• Installing Windows
®
XP Service Pack 1 or later version is recommended.
• Ensure to enable the Hyper-Threading Technology item in BIOS before
installing a supported operating system.
• For more information on Hyper-Threading Technology, visit www.intel.
com/info/hyperthreading.
Summary of Contents for P5Q SE R
