Asus P5Q SE R User Manual Download

Page: 134 / 162

5-28

Chapter 5: Software support

Setting menu

Click Setting

(

)

from the 4 Engine main menu to display

configuration options in each mode. Some options in certain modes are dimmed,

meaning that they are not available.

Click to select

a mode

Click the arrow

to see more

options

Restore default

settings

Click to apply

settings

Click to abort

settings

Configuration options in Setting menu

The following lists the configuration options and their definitions in Setting menu.

• vCore Voltage Downgrade:

Lowers CPU vCore voltage.

•

High:

Downgrades voltage to the highest level for CPU power saving.

•

Medium:

Downgrades voltage to the medium level.

•

Small:

Downgrades voltage to the minimum level.

• Turn Off hard disks:

Turns off hard disk drives when they are not accessed

after a certain time.

• CPU Loadline:

Sets up the CPU loadline to manage CPU power saving.

•

Light:

Saves CPU power to the minimum level.

•

Medium:

Saves CPU power to the medium level.

•

Heavy:

Saves CPU power to the highest level.

Summary of Contents for P5Q SE R



































































































































































Search results

Summary of Contents for P5Q SE R

Reviews:

Related manuals for P5Q SE R

Brands by name

Popular brands

Asus P5Q SE R, User Manual

Search results

Summary of Contents for P5Q SE R

Reviews:

Related manuals for P5Q SE R

Brands by name

Popular brands