Asus P5Q SE R User Manual Download

Page: 52 / 162

2-28

Chapter 2: Hardware information

6. USB connectors (10-1 pin USB78, USB 910, USB1112)

These connectors are for USB 2.0 ports. Connect the USB module cable

to any of these connectors, then install the module to a slot opening at the

back of the system chassis. These USB connectors comply with USB 2.0

specification that supports up to 480 Mbps connection speed.

Never connect a 1394 cable to the USB connectors. Doing so will damage the

motherboard!

You can connect the front panel USB cable to the ASUS Q-Connector (USB,

blue) first, and then install the Q-Connector (USB) to the USB connector

onboard if your chassis supports front panel USB ports.

The USB module cable is purchased separately.

P5Q SE/R

P5Q SE/R USB 2.0 Connectors

USB78

USB+5V USB_P8

USB_P8

USB+5

USB_P7

USB1112

USB+5V USB_P12 USB_P12 GN

USB+5V

USB_P1

GND

- +

USB910

USB+5V USB_P10 USB_P10 GN

USB+5

USB_P9

GND

- +

7. Optical drive audio connector (4-pin CD)

These connectors allow you to receive stereo audio input from sound sources

such as a CD-ROM, TV tuner, or MPEG card.

P5Q SE/R

P5Q SE/R Internal Audio Connector

(black)

Righ

udio Channel

Lef

udio Channel

ound

Ground

Summary of Contents for P5Q SE R



































































































































































Search results

Summary of Contents for P5Q SE R

Reviews:

Related manuals for P5Q SE R

Brands by name

Popular brands

Asus P5Q SE R, User Manual

Search results

Summary of Contents for P5Q SE R

Reviews:

Related manuals for P5Q SE R

Brands by name

Popular brands