Asus DSL-N12HP User Manual Download

Page: 99 / 181

Select SSID

Select the wireless network name from the drop-down menu. SSID stands for

Service Set Identifier. All stations must be configured with the correct SSID to access

the WLAN. If the SSID does not match, that client will not be granted access.

Network Authentication

This option specifies whether a network key is used for authentication to the

wireless network. If network authentication is set to Open, then no authentication is

provided. Despite this, the identity of the client is still verified.

Each authentication type has its own settings. For example, selecting 802.1X

authentication will reveal the RADIUS Server IP address, Port and Key fields. WEP

Encryption will also be enabled as shown below.

The settings for WPA authentication are shown below.

The settings for WPA2-PSK authentication are shown next.

Summary of Contents for DSL-N12HP






















































































































































































Search results

Summary of Contents for DSL-N12HP

Reviews:

Related manuals for DSL-N12HP

Brands by name

Popular brands

Asus DSL-N12HP, User Manual

Search results

Summary of Contents for DSL-N12HP

Reviews:

Related manuals for DSL-N12HP

Brands by name

Popular brands