Asus DSL-N12HP User Manual Download

Page: 164 / 181

164

Appendix G

Notices

ASUS Recycling/Takeback Services

ASUS recycling and takeback programs come from our

commitment to the highest standards for protecting our

environment. We believe in providing solutions for you to be able

to responsibly recycle our products, batteries, other components,

as well as the packaging materials. Please go to http://csr.asus.

com/english/Takeback.htm for the detailed recycling information

in different regions.

REACH

Complying with the REACH (Registration, Evaluation,

Authorisation, and Restriction of Chemicals) regulatory

framework, we published the chemical substances in our products

at ASUS REACH website at

http://csr.asus.com/english/index.aspx

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions:

• This device may not cause harmful interference.
• This device must accept any interference received, including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the

limits for a class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation.

Summary of Contents for DSL-N12HP






















































































































































































Search results

Summary of Contents for DSL-N12HP

Reviews:

Related manuals for DSL-N12HP

Brands by name

Popular brands

Asus DSL-N12HP, User Manual

Search results

Summary of Contents for DSL-N12HP

Reviews:

Related manuals for DSL-N12HP

Brands by name

Popular brands