Asus DSL-N12HP User Manual Download

Page: 125 / 181

125

Selected

WAN

interface: br0

This filter will ACCEPT all TCP packets coming from

WAN interface “br0” with IP Address/Subnet Mask

210.168.219.45/16 with a source port of 80, irrespective of

the destination. All other incoming packets on this interface

are DROPPED.

Example 2

Filter

Name:

In_Filter2

Protocol:

UDP

Policy:

Allow

Source

Address:

210.168.219.45

Source

Subnet

Mask:

255.255.0.0

Source

Port:

5060:6060

Dest.

Address:

192.168.1.45

Dest.

Sub.

Mask:

255.255.255.0

Dest.

Port:

6060:7070

Selected

WAN

interface: br0

This rule will ACCEPT all UDP packets coming from

WAN interface “br0” with IP Address/Subnet Mask

210.168.219.45/16 and a source port in the range of 5060 to

6060, destined to 192.168.1.45/24 and a destination port in

the range of 6060 to 7070. All other incoming packets on this

interface are DROPPED.

MAC LAYER FILTER

These rules help in the filtering of Layer 2 traffic. MAC Filtering is

only effective in Bridge mode. After a Bridge mode connection is

created, navigate to

Advanced Setup

Security

MAC Filtering

in the Web GUI.

Example 1

: Global Policy:

Forwarded

Protocol

Type:

PPPoE

Dest.

MAC

Address:

00:12:34:56:78:90

Source

MAC

Address:

Summary of Contents for DSL-N12HP






















































































































































































Search results

Summary of Contents for DSL-N12HP

Reviews:

Related manuals for DSL-N12HP

Brands by name

Popular brands

Asus DSL-N12HP, User Manual

Search results

Summary of Contents for DSL-N12HP

Reviews:

Related manuals for DSL-N12HP

Brands by name

Popular brands