Asus DSL-N12HP User Manual Download

Page: 130 / 181

130

Firewall/Filtering

•  Stateful Inspection Firewall
•  Stateless Packet Filter
•  Denial of Service (DOS): ARP attacks, Ping attacks, Ping of

Death, LAND,SYNC, Smurf, Unreachable, Teardrop

• TCP/IP/Port/interface filtering rules Support both incoming

and outgoing filtering

NAT/NAPT

•  Support Port Triggering and Port forwarding
•  Symmetric port-overloading NAT, Full-Cone NAT
•  Dynamic NAPT (NAPT N-to-1)
•  Support DMZ host
•  Virtual Server (Port forwarding)
•  VPN Passthrough (PPTP, L2TP, IPSec)

Application Passthrough

PPTP, L2TP, IPSec, Yahoo messenger, ICQ, RealPlayer, NetMeeting,

MSN, X-box, etc.

NOTE

: Specifications are subject to change without notice.

Summary of Contents for DSL-N12HP






















































































































































































Search results

Summary of Contents for DSL-N12HP

Reviews:

Related manuals for DSL-N12HP

Brands by name

Popular brands

Asus DSL-N12HP, User Manual

Search results

Summary of Contents for DSL-N12HP

Reviews:

Related manuals for DSL-N12HP

Brands by name

Popular brands