Asus DSL-N12HP Page 143 User Manual Download

Page: 143 / 181

143

PPPoE clients, otherwise disable it. The DSL-N12HP supports pass-

through PPPoE sessions from the LAN side while simultaneously

running a PPPoE client from non-PPPoE LAN devices.

ENABLE IGMP MULTICAST PROXY

Tick the checkbox to enable Internet Group Membership Protocol

(IGMP) multicast. This protocol is used by IPv4 hosts to report

their multicast group memberships to any neighboring multicast

routers.

NO MULTICAST VLAN FILTER

Tick the checkbox to Enable/Disable multicast VLAN filter.

Enable WAN interface with base MAC
Enable this option to use the router’s base MAC address as the

MAC address for this WAN interface.

3. Choose an interface to be the default gateway.

Click

Next

to continue or click

Back

to return to the previous step.

Select DNS Server Interface from available WAN interfaces OR

enter static DNS server IP addresses for the system. In ATM mode,

if only a single PVC with IPoA or static IPoE protocol is configured,

Static DNS server IP addresses must be entered.

Summary of Contents for DSL-N12HP






















































































































































































Search results

Summary of Contents for DSL-N12HP

Reviews:

Related manuals for DSL-N12HP

Brands by name

Popular brands

Asus DSL-N12HP, User Manual

Search results

Summary of Contents for DSL-N12HP

Reviews:

Related manuals for DSL-N12HP

Brands by name

Popular brands