Astronics PXIe-1209, User Manual

Page: 40 / 60

PXIe-1209 User Manual Publication No. 981050 REV. A
Operation 5-6 Astronics Test Systems
will be enabled. When it is configured as and output, the “M Trigger A Output”
selection will be enabled. The same is true for M Trigger B.
The possible selections for M Trigger A input are:

Not Connected – default

PXI TRIG 0 – the input is connected to the PXI TRIG0 line (PGEN 1 only)

PXI TRIG 1 – the input is connected to the PXI TRIG1 line (PGEN 1 only)

PXI TRIG 4 – the input is connected to the PXI TRIG0 line (PGEN 2 only)

PXI TRIG 5 – the input is connected to the PXI TRIG1 line (PGEN 2 only)

Inter-trigger connect – the input is routed to an on-board trigger interconnection
module, and so could be connected to M Trigger B output of this pulse
generator or M Trigger A output or M Trigger B output of the alternate pulse
generator.

PXI 10 MHz – the input is connected to the PXI 10 MHz clock
The possible selections for M Trigger A output are:

Not Connected – default

PXI TRIG 2 – the output is connected to the PXI TRIG2 line (PGEN 1 only)

PXI TRIG 6 – the output is connected to the PXI TRIG6 line (PGEN 2 only)

Inter-trigger connect – the output is routed to an on-board trigger
interconnection module, and so could be connected to M Trigger B of this
pulse generator or M Trigger A or M Trigger B of the alternate pulse generator.
The possible selections for M Trigger B input are:

Not Connected – default

PXI TRIG 0 – the input is connected to the PXI TRIG0 line (PGEN 1 only)

PXI TRIG 1 – the input is connected to the PXI TRIG1 line (PGEN 1 only)

PXI TRIG 4 – the input is connected to the PXI TRIG0 line (PGEN 2 only)

PXI TRIG 5 – the input is connected to the PXI TRIG1 line (PGEN 2 only)

Inter-trigger connect – the input is routed to an on-board trigger interconnection
module, and so could be connected to M Trigger A output of this pulse
generator or M Trigger A output or M Trigger B output of the alternate pulse
generator.

PXI 10 MHz – the input is connected to the PXI 10 MHz clock
The possible selections for M Trigger B output are:

Not Connected – default

PXI TRIG 3 – the output is connected to the PXI TRIG3 line (PGEN 1 only)

PXI TRIG 7 – the output is connected to the PXI TRIG7 line (PGEN 1 only)

Inter-trigger connect – the output is routed to an on-board trigger
interconnection module, and so could be connected to M Trigger A of this
pulse generator or M Trigger A or M Trigger B of the alternate pulse generator.