Connecting the plug-in card
Operating manual V 506 a. X-QAM 621 CT2 -
Version 10-2014A
Page 6
Connecting the plug-in card
Connect both tuners A and B with the DVB-T/T2/C signal
[1] Tuner A
[2] Tuner B
Figure 5: Connecting tuner with DVB-T/T2/C signal
A
UFGABE
1.
Screw the respective F connector at the end of the cable onto
the sockets [1] (tuner A) and [2] (tuner B).
E
RGEBNIS
:
The plug-in card is now connected and can be installed in the base
unit. Installation instructions can be found in the operating manual
for the respective base unit.
Programming using the HE programming software
Activating the V 506 and X-QAM 621 CT2 in the HE programming
software
Once you have installed the plug-in card in the base unit, you can
start programming. This section tells you how to do this using the
HE programming software. You will find information on how to use
this software in the operating manual for the programming software.
Start by checking whether the card appears in the planning screen
of the base unit. To do this, select the menu
Planning - display
base unit
. You will now see the planning screen (see figure 6, be-
low).
