Page 15
Programming using the HE programming software
Operating manual V 506 a. X-QAM 621 CT2 -
Version 10-2014A
The
Adjustment
screen now appears (see figure 10).
Figure 10: Setting the output level
This is how you set the output level for channels A and B:
A
UFGABE
1.
Select the desired output from the drop-down menus for output
channels A and B. You can enter values between 0 dB and
15.5 dB.
2.
You now click on the
Parameter write
button to save the
values entered.
3.
You can copy the changes to the configuration onto the plug-in
card by clicking on the
Program card
button at the top right
of the
Detailed settings
screen (see left).
E
RGEBNIS
:
The output levels have now been set.
SI/PSI configuration
Click on the
Details
button in the planning screen to open the
Detailed settings
screen. Here on the
SI/PSI
Configuration
tab you can define the parameters for the two
channels, A and B (see figure 11 below).
