ASTRO V 506 X-QAM 621 CT2 Operating Manual Download Page 2

Page: 2 / 20

Device description

Operating manual V 506 a. X-QAM 621 CT2 -

Version 10-2014A

Page 2

Device description

The delivery consists of the following parts:



V 506 and X-QAM 621 CT2 plug-in cards



2 connection cables with F connectors, 450 mm & F socket-F
socket adapter



Operating manual

[1] Tuner A
[2] Tuner B
[3] Slot for output
channel filter (V 506 only)

Figure 1: V 506 plug-in card

The V 506 and X-QAM 621 CT2 plug-in cards feature a CE marking.
This confirms that the product conforms to the relevant EG direc-
tives and adheres to the requirements specified therein.

Warranty conditions

The general terms and conditions of ASTRO Strobel GmbH apply.
You will find these in the current catalogue or on the Internet under
www.astro-kom.de.

Summary of Contents for V 506 X-QAM 621 CT2





















Search results

Summary of Contents for V 506 X-QAM 621 CT2

Reviews:

Related manuals for V 506 X-QAM 621 CT2

Brands by name

Popular brands

ASTRO V 506 X-QAM 621 CT2, Operating Manual

Search results

Summary of Contents for V 506 X-QAM 621 CT2

Reviews:

Related manuals for V 506 X-QAM 621 CT2

Brands by name

Popular brands