Page 13
Programming using the HE programming software
Operating manual V 506 a. X-QAM 621 CT2 -
Version 10-2014A
A
UFGABE
1.
In the
Detailed settings
screen, click on the
Check
signal quality
button to open the
Signal quality
window (see left).
2.
You can now check the quality of the available signal. Click on
Stop measurement
to complete the test.
E
RGEBNIS
:
The signal quality has now been checked.
Defining the output parameters
You define the output channels for the V 506 and X-QAM 621 CT2
in the planning screen; these are the channels which are used to
supply the cable with the programmes sourced from the DVB-S2
bouquet (see left).
Figure 9: Output parameters
Click on the
Details
button in the planning screen to open the
Detailed settings
screen. Here you can define the parameters
for the two channels, A and B, using the
Output parameters
tab.
