Page 11
Programming using the HE programming software
Operating manual V 506 a. X-QAM 621 CT2 -
Version 10-2014A
Configuring the DVB-T tuner
Figure 10: Input parameters for the DVB-T tuner
A
UFGABE
1.
Select the “DVB-T” entry from the
Tuner Mode
drop-down
menu.
2.
Select the desired channel or the special channel from the
Channel
drop-down menu.
3.
Enter the desired frequency in the
Frequency
input field.
4.
Select the desired bandwidth (6, 7 or 8 MHz) from the
Bandwidth
drop-down menu.
5.
The FFT mode and the guard interval are set automatically.
6.
You can optionally activate a 5 V remote power supply for a
connected DVB-T antenna by clicking on the
Remote supply
power (5 V)
checkbox.
E
RGEBNIS
:
The input parameters are now defined and you can check the signal
quality (see following section “Checking the input signal quality”).
