Please read and follow the installation instructions and guidelines in this section.
Failure to follow the recommended instructions and installation techniques may
lead to possible damage to the unit or the surrounding area and can affect
warranty claims.
ATTENTION:
This unit requires assembly. We strongly encourage you to use a
minimum of two people to aid in the assembly, as several of the sections are large
and unstable until assembled.
You will need to consider several factors when planning for your installation
location. While all installations are unique, the following are general guidelines:
1. WARNING:
The unit requires electrical power to operate and is required by
code to be connected to a GFCI protected circuit by a licensed electrician.
NEVER connect this unit to a circuit that is not GFCI protected.
2. The unit is designed for indoor use ONLY.
3. Unit requires a licensed plumber for installation.
4. The installation must allow for future service. The unit is designed to be
modular meaning the unit can be moved as a whole piece after assembly
with flexible supply lines and a flexible drain. All electronic components and
plumbing connections are typically located on the back wall of the unit, which
in many cases is next to a service wall. In the event that service is required,
the repair technician will require access to these components.
5. If you are planning for a permanent installation, you must provide access to
the back of the unit through some type of service panel.
NOTE: Aston
Global, Inc. is not responsible for and will not reimburse the cost to fix
any damage or any repairs needed that are caused by the need to
service the unit even if the service work
required is under warranty
.
6. CAUTION:
A flexible drain kit is provided with the unit. The distance between
the floor drain and the unit drain should not exceed 18 inches centerline to
centerline.
Installation Guide
9
