E. Unconsciousness and danger of drowning
To operate the steam generator use the following instructions
:
1. Press the main “on/off” button to turn on the power.
2. Press the “steam” button to start the steam generator. Once you start the
steam generator, it will automatically fill with water and will produce steam
within three (3) to five (5) minutes.
NOTE:
The default time is 60 minutes and the default temperature is 104 F (40
C).
The unit will produce steam and raise the internal temperature to your set point.
Once your set temperature is reached, the steam will stop. The tolerance of the
temperature is +/- 2 F; therefore, as long as you have time for the steam cycle the
unit will maintain your set temperature.
If you wish to change the length of time for the steam cycle press the “time” button
up or down. The maximum set time is 99 minutes.
If you wish to change the set temperature, press the “temp” button up or down.
The maximum set temperature is 122 F (50 C).
If you wish to end the steam cycle before the timer has completed, press the
steam button to turn off the steam generator or the main power button.
Flushing the steam generator
WARNING:
Please use caution when flushing the unit immediately after use as
the unit may still contain hot water.
It is important to flush the steam generator to prevent any issues and maintain the
life span of the steam generator.
To flush the steam generator after completion of the steam cycle, press and hold
the ”steam” button for five seconds. The unit will begin to flush.
Continue pressing the “steam” button until the unit is fully flushed, and then
release the “steam” button.
If you fail to flush the steam generator after use the unit will automatically flush
four hours after you have turned the unit off.
42
