V4.4 03/08/18
TD0036
Page 15 of 39
This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT”
6.2
REMOVING THE CONTROL PANEL
1.
Using one of the Master keys, open the control pod by turning the key 90° clockwise.
2.
The pod front can now be leaned forward onto its restraining cable.
3.
The following cables must be disconnected before the Control Panel can be removed:
1.
Receptor Cable
2.
Power, Battery, Door, Tamper Switch 2 and 3 cables and Reader cable (if applicable)
3.
Speaker, Network and USB cables (if applicable)
4.
Earth Cable
The images below show the locations of the cables that must be disconnected.
