Assa Abloy N5951000PILL000, Installation And Mounting Instructions

Page: 37 / 124

37
EN
DIP switch DIP Position Effect
1 ON Terminating resistor
1 OFF no terminating resistor
2 ON Hi-O group 1
2 OFF Hi-O group 0
SYSCON4 Description
1 VB +
2 CAN H
3 CAN L
4 VB –
SYSCON7 Description
7 Output 3 Black Open collector
6 Vcc Red
5 Output 5 grey Open collector
4 Output 6 Brown Open collector
3 Output 4 Blue Open collector
2 VB – Yellow
1 VB + green
Note!
The connecting cable to SYSCON7 must be processed: in order to use the OC
outputs, the plug must be used and cut through at the other end (PIN 1/3/4 or 5,
depending on the OC output to be used). Afterwards, the signal to be controlled
is connected with an on-site connecting clamp.
ON
21
9
51
3
CTS
1 2
4 VB- 3 CAN
L
2 CAN
H
1 VB+
7 Ausgang 3
6 Vcc
5 Ausgang 5
4 Ausgang 6
3 Ausgang 4
2 VB-
1 VB+
I