FM336 9800 TCWI1 Series
6
Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express
written permission of Corbin Russwin, Inc. is prohibited.
NOTE
:
Lever return spring is handed. Hand of trim
cannot be changed without correct spring.
Lever return spring handing can be identified
by the color of the spring:
LHR, part number 651F618 (Red)
RHR, part number 651F628 (Blue)
1. Check cylinder components.
NOTE: Cylinders longer than 1-1/8" (29mm) will require collars. Refer to Cylinder Chart Below.
2. When required, cut cylinder tailpiece.
Correct length is 1/16" to 3/16" (2 to 5 mm) beyond cylinder housing cam.
Assembly of cylinder:
• Insert cylinder housing prongs into matching notches of escutcheon.
• Pass cylinder tailpiece thru cylinder collar (when required) and slot cylinder housing cam.
• Fasten cylinder in escutcheon recess of collar using (2) mounting screws.
(DO NOT OVER TIGHTEN SCREWS.)
3
Escutcheon Assembly:
Lever is handed, LHR (show)
Rim Cylinder
Cylinder Collar
(if necessary)
Cam must be postitioned as shown
when cylinder tailpiece is assembled
4) Installation Instructions
