7
4) Installation Instructions
Battery Installation
1.
Remove battery keeper by lifting top tab and pulling away from the unit.
2. Install (6) AA Batteries into controller compartment being careful to align +/-polarity properly.
3. Install Battery Keeper by first inserting bottom tabs in bottom slots of controller. Lift the top
tab over batteries and snap into position.
4. Attach battery cover to inside controller escutcheon making sure to line up tabs with
retaining slots in battery cover. Secure with security screw using security T20 bit.
CAUTION
DOOR MUST REMAIN OPEN
DURING INSTALLATION.
USE DOOR STOP.
TEST
FOR PROPER
OPERATION
BEFORE
CLOSING
DOOR
Tabs
Battery Polarity
Battery Keeper
Bottom Tabs
Retaining Slots
Security Screw
T20 bit
Top Tab
9
FM336 9800 TCWI1 Series
Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express
written permission of Corbin Russwin, Inc. is prohibited.
6
