12
FM336 9800 TCWI1 Series
Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express
written permission of Corbin Russwin, Inc. is prohibited.
Cable: CAT 5e or higher
24 AWG shielded with drain wire
JST
4-Pin
Molex-F
Molex-F Molex-M
Cable
: CAT 5e,
26 AWG stranded,
shielded, 100ohm
TIA/EIB-568-B Standard Wiring
RJ45-M
Molex-M
RJ45-F Jack
Cable
: CA
T 5e or higher
24 A
WG shielded, 100ohm
Approved Software
B-Splice
Crimp Connector
Certified Integrator (CI) supplies and terminates
the B-Splice connector and the
Male RJ45 connector from harness to
end user provided facility cable
Supplied by End User
PoE Switch
PoE
Lock
Ceiling
Supplied by CI
C
B
A
PoE Patch Panel
Drain Wire Terminated on Rack
D
Ground
Ring Terminal
Secured to Lock
Mounting Plate
Drain Wire
PoE Switch
Rack is
Terminated to
Earth Ground
Patch Cable:
PoE Panel to
PoE Switch
4-Pin
Molex
PoE Frame harness assembly
(From McKinney)
PoE data hinge (Patent Pending)
(From McKinney)
C. PoE Door harness*
(From McKinney)
D. Access 800 PIP (PoE Lock)
* Order of installation may vary.
Refer to appropriate sections for instructions.
Frame-Side
Harness
Assembly
(15' length)
24AWG
Stranded
Drain
Wire for
Earth
Ground in
15' Frame
Harness
Cable drain wire
concealed in
shrink tubing
7) PIP (PoE) Installation Wiring
1.
PIP (PoE) Installation Wiring:
A
B
C
D
