only in IP Phone mode.
2.Back View
DC 9V
: DC 9V power input outlet
♦
♦
♦
♦
LAN
: RJ-45 connector, connected directly to the
Hub
through the
straight
CAT-5 cable.
PC
: RJ-45 connector, connected directly to the
PC
through the
straight
CAT-5 cable
Line
: RJ-11 connector, connected directly to the PSTN analog line.
Note: There are two LED indicated lights: LINK/ACT and 10/100 for LAN port and PC port.
When network status is in normal, LED of LINK/ACT will be flashing; when transmit rate is in
10 mbps/100mbps, LED of 10/100 will light off/on .
3.Specification of connector
1 Ethernet Port
Ethernet port is for connecting IP PHONE to network, transmit rate supports 10/100
Base-T.
8
