10.[ddns] command
This function is for Dynamic Domain Name Server service. Once user register to one
DDNS server, he can specify domain name for the IP PHONE. When IP PHONE reboot,
it will automatically update it’s IP address to DDNS server. In this way, even IP PHONE is
using dynamic IP address, other endpoint can locate this IP PHONE by it’s domain
name.
1. -print: display DDNS overall information and configuration.
2. –enable: to enable/disable DDNS function.(
ddns –enable 0/1
, 0 for disable and 1
for enable).
-
-server: to set IP address of DDNS login server. (Now only one DDNS server is
available---www.dyndns.org)
3.
4. -hostname: to set the registered Domain Name of IP PHONE. (ex.
ddns –lp001.ddns.org
)
5. –id: to set login ID of registered account to log in DDNS server.
6. –passwd: to set password of registered account to log in DDNS server.
7. –checkip: to enable/disable check IP function. If IP PHONE is behind IP sharing,
when this function is enabled, IP PHONE will check it’s public IP address by asking
IP address check server and send to DDNS server to update DDNS data. If this
function is disabled, when IP PHONE is behind IP sharing, it will send it’s private IP
address to DDNS server.
8. -checkipsrv: to set IP address of IP address check server.
9. -delay: to set the update interval time. IP PHONE will re-update it’s IP address in this
time. (
ddns –delay 1-59m/1-24h
, m means minute, h means hour)
10. –force: to force to execute DDNS update. Once user enter this command , IP
22
