2. Wait around one minute until the IP PHONE finishes boot program initialization.
3. User can see flashing greeting as below:
System Initializing…………..
4. Then IP PHONE get into standby mode:
IP-Phone
GK
10:10:10 AM
The main LCD screen would be shown as similar as above. The GK word means the IP
PHONE is in GateKeeper Mode, and when IP PHONE is connected to SNTP server, on
LCD will show current time from SNTP server.
5. After pressing the
PSTN
button, the GK word will be replaced by PSTN. Then IP
PHONEis in PSTN Mode. Please notice that in PSTN mode user must plug PSTN
line in RJ-11 port.
IP-Phone
PSTN
10:10:10 AM
Press or to enter configuration mode then press
OK
Bottom to enter certain menu.
There are 6 selections for configuration.
1. System Configuration (mandatory, protected by password)
2. User Line Number (mandatory)
3. Ring
Configuration
4. Indicate
Forward
Type
5. Message
Box
6. Phone
Address
Book
Note:
LCD Panel of IP PHONE is operated manually by moving or on the keypad.
Press OK to enter separate configuration menu. Press C to go back to the main
menu.
10
