80, if port 80 is not available or user has more than 1 IP PHONE behind NAT, http port
can be changed to another available port.
7. [time] command
When sntp server is established as well as the sntp function of IP PHONE is enabled,
type
time
command should show the current time what is retrieved from the assigned
sntp server.
Note: Please refer to the Chapter 4.6 [ifaddr] command to configure sntp
server..
8. [ping] command
Command
ping
can test which the IP address is reachable or not.
Usage: ping “xxx.xxx.xxx.xxx(IP address)”
The message will display packets transmitting condition or no answer from the IP
address.
20
