Configuring the Unit via its Web Interface
Receivers (Inputs)
ENC 1202
Version 1.0 Page
30
Full Scale Reference
This fader icon allows you to set the analog reference level for 0dBFS (digital full-scale
level, i.e. the highest digital level before clipping occurs). Depending on the console(s)
used and on the requirements of the organization or client one is working for, this refer-
ence may have to be +15dBu= 0dBFS, +24dBu= 0dBFS, or something else. This setting
affects the read-out of the Peak Level meter below this fader.
The setting range for this parameter is –15dBu~+24dBu. Hold down the Shift key while
double-clicking the fader to reset the fader to 0dBu. Double-click the fader to set it to the
minimum value.
Peak Level
The “Peak Level (L)” and “Peak Level (R)” meters show the peak levels of the left and right
channels.
The audio signal’s current level is displayed in orange on a scale between –∞dBFS (corre-
sponds to –126dBFS) and 0dBFS.
EQ
The ENC 1202 is equipped with 3-band parametric equalizers and low-cut (or
high-pass) filters.
Low Cut
The “Low Cut” section allows you to set the low-cut filter (high-pass). There are
2 parameters:
1. Use the drop-down menu (
t
) to set the filter slope. The following settings
can be selected: Off (Low Cut off), 12dB/octave, 18dB/octave, 24dB/octave,
36dB/octave.
