Configuring the Unit via its Web Interface
Function Bar
ENC 1202
Version 1.0 Page
17
4.2.2 Right Part of the Function Bar
Factory Reset
This function allows you to restore the ENC 1202’s factory settings (also called “initializ-
ing”).
Careful:
• Restoring the factory settings overwrites the configuration stored inside the unit. We recom-
mend backing up the ENC 1202’s current configuration settings to your computer (see “Down-
load Config”, p. 16) before initializing it.
1.
Click [Factory Reset] to open the following window:
2.
Click [OK] to confirm this command (or [Cancel] if you don’t want to proceed).
If you confirm, the ENC 1202 reboots and restores the factory settings.
Reboot
If, for some reason, the ENC 1202 needs to be restarted, click [Reboot]. If you do, the fol-
lowing confirmation dialog is displayed:
Click [OK] to confirm this command (or [Cancel] if you don’t want to proceed).
Login/Logout
[Login] or [Logout] (depending on the current status) allows you to log into, or out of, the
ENC 1202. To log in, you will be asked to enter the password:
By default, the password is “
password”. Enter it and click [Ok].
