If you own a compatible hood with RF
connectivity, you can pair it to your induction
hob! To do so, set this parameter to on. Hood
control icons will start blinking. You now have 5
minutes to activate the pairing on your RF hood.
Once the hood is paired to your induction hob,
the hood control icons will stop blinking.
hth
- Hob-to-hood pairing (RF)
If you wish to unpair the hood, set the hth
parameter again to off.
This setting allows induction hob to automatically
activate the lights of the connected hood every
time the induction hob is turned on. Depending
on the value you set, the ventilation will
automatically start at that speed level when any
cooking zone is activated.
Hst
- Hob-to-hood
(Synchro Start Level)
This setting allows induction hob to automatically
activate the lights of the connected hood every
time the induction hob is turned on. While on,
the hood will be controled automatically
depending on the current highest activated
cooking level. If you manually change any hood
related settings, the hood turns to manual control
for the rest of this cooking session. The response
level can be set: L3 (high), L2 (medium), L1
(low), off.
Hsc
- Hob-to-hood
(Synchro Control response Level)
This setting allows induction hob to automatically
deactivate the lights of the connected hood
every time the induction hob is turned off.
Depending on the value you set, the ventilation
will switch to that speed level and stop with a
delay.
HsP
- Hob-to-hood
(Synchro Stop Level)
To pair a bluetooth device, set this setting to on.
You now have 3 minutes to pair a new bluetooth
device to this induction hob.
Btp
- Bluetooth device pairing
To unpair all the bluetooth devices, set this
setting to Clr. All your connected bluetooth
devices are now unpaired.
BtC
- Bluetooth clear paired devices
To receive firmware updates for the cooking
hob, you need to be paired to the cooking hob
via the mobile app. You will receive a
notification, or you can check available firmware
updates on the mobile app menu for updates.
FoA
- Firmware update over the air
In order to start the firmware update via the
mobile app, set this setting to on to confirm your
presence at the cooking hob. For more
information see chapter “Firmware Update”.
After 10 min, this setting is automatically reset
to off.
48
Settings
