ashtech GG Surveyor, Reference Manual

Page: 42 / 256

24 GG Surveyor GPS+GLONASS Reference Manual
RTCM differential parameters and status default values of $PASHQ,RTC. See
“$PASHQ,RTC,c” on page 179 for more information.
The $PASHQ,CPD query is available only if the carrier phase option [P] is installed
in the receiver. Figure 4.4 shows a typical response message for the carrier phase
differential parameters and status default values of $PASHQ,CPD. See
“$PASHQ,CPD,c” on page 186 for more information.
The query commands $PASHQ,PAR, $PASHQ,RAW, $PASHQ,RTC, and $PASHQ,CPD are
intended for use with an interface such as a computer screen. The response messages are formatted
to display correctly on a screen; they are not intended as machine-readable messages. Ashtech
recommends using the one-line response messages for automated applications.
STATUS:
SYNC: TYPE:00 STID:0000 STHE:0
AGE:+999 QA:100.0% OFFSET:00
SETUP:
MODE:OFF PORT:A AUT:N
SPD:0300 STI:0000 STH:0
MAX:0060 QAF:100 SEQ:N
TYP:1 2 3 6 9 16 31 32 6G 34 36
FRQ:99 00 00 OFF 00 00 99 00 OFF 00 00
BASE: LAT:0000.0000,N LON:00000.00000,W ALT:+00000.00 WGS
MSG: first 45 characters of RTCM type 16 message
next 45 characters of RTCM type 16 message
MSG (GLO):first 45 characters of RTCM GLONASS type 36 message
next 45 characters of RTCM GLONASS type 36 message
Figure 4.3: $PASHR,RTC Default Response Message
STATUS:
RST_TIME:000000 FIX_TIME:000000
LATENCY:0046 AMB:FIXED LENGTH:00000.0011 VELOCITY:000.0037
ROV_SV: 04 14 16 18 19 22 25 29 42 - 44 52
BAS_SV: 04 14 16 18 19 22 25 29 42 43 44 52
BASE POSITION:RECEIVED 3759.729431 N 12159.549345 W -4.790
ID:0000
BASE_DELTA:RECEIVED
SETUP:
MODE:ROV PORT:B SYS:MIX PEM:10
FST:ON FST_RATE:02 AFP:99.0 MAXAGE:30
Figure 4.4: $PASHR,CPD Default Response Message