ashtech GG Surveyor, Reference Manual

Page: 103 / 256

Command/Response Formats 85
Com
m
and
s
where Table 6.12 outlines the response format.
Field d5 indicates the mounting status of the file system in percent; 100 indicates the file system is
fully mounted
All file system commands are available only when the system is fully mounted. Mounting takes just a
moment if the internal memory was not reset (see command $PASHS,INI). If the internal memory
was reset, mounting can take a few minutes. In this case, command $PASHQ,FSS (parameter d5 in
particular) is a convenient way to get the current estimation of the mounting percent.
GTF: Set GLONASS Time Shift
$PASHS,GTF,d
This command sets the GLONASS system time shift hold position fixed mode, where
d is 0 or 1.
d = 0 - Use the most recent computed GLONASS system time shift
d = 1 - Always use GLONASS system time shift entered by
$PASHS,DTG.
Default is 0.
This command does not set the GLONASS system time shift, but just says whether to use the last
computed or entered value of GLONASS system time shift in fixed mode.
Table 6.12: FSS Response Structure
Field Description
f internal diagnostic number (not used by user), 4 digits in hex
d1 internal diagnostic number, 2 digits
d2 internal diagnostic, 2 digits
d3 index of current file, 3 digits in range 0-99 or 999 if there is no current file
d4 total number of files, 3 digits
d5 mounting, percent done, 3 digits.