ashtech GG Surveyor, Reference Manual

Page: 123 / 256

Command/Response Formats 105
Com
m
and
s
Example: Record a C-file (position only) in data storage.
$PASHS,RNG,2<Enter>
RST: Reset Receiver to Default Parameters
$PASHS,RST
Reset the receiver parameters to their default values. For more information, see the
query commands PAR, RAW, and RTC.
Example: Reset user parameters to default values.
$PASHS,RST<Enter>
SAV: Save User Parameters
$PASHS,SAV,x
Enables or disables saving user parameters in the battery-backed-up memory (BBU),
where x is Y (yes) or N (No). User parameters (entered before issuing the SAV
command) are saved until commands INI or RST or SAV,N are issued. The default is
N. All parameters are saved in the battery backup memory except the POP parameter.
Set commands issued after the SAV command is issued are not saved.
Example: Save user parameters to internal battery memory
$PASHS,SAV,Y<Enter>
SIT: Set Site Name
$PASHS,SIT,s
Set site name, where s is a 4 character string.
Example: Set site name to 0001
$PASHS,SIT,0001<Enter>
SMI: Code Measurement Smoothing
$PASHS,SMI,d
Sets the interval in seconds of code measurements smoothing, where d is the interval
in seconds ranging from 0 to 1000. The default is 100.
Example: Set code measurement smoothing to 200 seconds.
$PASHS,SMI,200<Enter>