ashtech GG Surveyor, Reference Manual

Page: 23 / 256

Introduction 5
Introduction
[5,2,1] Position Update Rate
Allows for position fixes to be issued one [1], two [2] or five [5] times per second.
[5,2,1] Raw Measurement Update Rate
Allows for raw measurement messages to be issued one [1], two [2] or five [5] times
per second.
[O] Raw Data Output
The [O] option enables the output of raw data.
[P] Carrier Phase
The [P] option enables output of carrier phase information within the measurement
messages.
[U] RTCM Remote
The [U] option allows the receiver to be used as a RTCM remote station capable of
decoding and using real-time differential corrections.
The GG Surveyor decodes RTCM-104, Version 2.2 format message types 1, 2, 3, 6,
9, 16, 22, 31, 32, and 34. If the [J] option is also enabled, the receiver can also
decode and use the RTCM RTK messages 18 and 19.
[B] RTCM Base
The [B] option allows the GG Surveyor to be used as a RTCM differential base
station capable of outputting real-time differential corrections.
The GG Surveyor outputs RTCM-104, Version 2.2 format message types 1, 2, 3, 6, 9,
16, 22, 31, 32, and 34. If the [J] option is also enabled, the receiver can also generate
the RTCM RTK messages 18 and 19.
[I] RAIM Availability
The [I] option allows the receiver to utilize autonomous integrity monitoring.
[L] Pulse Per Second (1PPS)
The [L] option allows the GG Surveyor to generate a 1 PPS signal.
S GLONASS
Table 1.3: GG Surveyor Receiver Options (continued)
Option Description (continued)