background image

11

4.2 Adjusting the Pedals

 
 
It is essential to make sure you have the correct pedal angle 
in any racing style. Setting this correctly will ensure maximum 
braking efficiency, allow you to use muscle memory to your 
advantage, and make you go even faster around the track! 

The pedals are set up in their default configuration (out of the 
box) to give you maximum immersion. In other words, they are 
set up to be focused on realism – like what you would find in a 
real race car. The brake is at 90° to the base, and the throttle 
tilted a few degrees forward. This allows for the most efficient 
braking and will allow you to train your muscle memory to 
perfection while also maximizing your trail braking potential. 
The throttle and clutch pedals are further forward to ensure that 
you will hit the brake pedal as the first thing in an emergency on 
track. 

The above setup is how it works in a real race car. We recommend 
you drive for several hours first and try to adapt. In a real race 
car, where you often have different drivers in the car (as well as 
in many endurance sim races), the pedals are adjusted like the 

above, and there is no opportunity to change that specifically to 
any driver. It is just physics that you will have the most efficient 
braking when the brake pedal is at a 90-degree angle.

Avoid eye contact with the lubrication grease and wash hands thoroughly after adjustment.

Summary of Contents for SimSports Forte P-BT-2













































Reviews: