background image

3

Symbols Used 

Make sure you pay attention to all warnings and symbols on the 
product and packaging.

Copyright 

The content of this manual is protected by copyright and 
other international intellectual property laws. The contents 
of this manual or any parts thereof may only be made public, 
copied, modified, reproduced, translated with express written 
permission from Asetek. This manual or any parts thereof may 
only be published, transmitted, displayed, or made available 
to a third party with express written permission from Asetek 
SimSports™.

Indicates that minor to moderate 
injuries may be sustained if the 
instruction is not followed correctly

This indicates that the product could 
be damaged if the instruction is not 
followed correctly

1. Introduction 

Thank you for purchasing the Asetek SimSports™ Forte™ pedals. 
We strongly encourage you to read through this manual 
thoroughly in its entirety. The Forte™ Pedals is a premium product 
made to fit each user.  

Inspired by real life racing, the Forte™ Sim Racing Pedal set 
has been thoroughly tested by racers and sim racers alike. 
With all their feedback in mind, the pedals were designed 
and engineered to give sim racers an amazingly immersive 
experience. The M.L.C.P.C.™ (Mechanical Load Cell Powered 
Cylinder) brake cylinder is designed to give you a realistic brake 
experience and is rigorously tested with up to 180 kg of pedal 
force. They have an excellent baseline adjustment out of the 
box, and we strongly encourage you to drive for 5+ hours with 
the baseline adjustments before changing anything. After that, 
your full immersion racing experience is unlocked when they are 
adjusted to your personal preference.

Summary of Contents for SimSports Forte P-BT-2













































Reviews: