Asetek SimSports Forte P-BT-2 Manual Download Page 12 | Manualshive

Page: 12 / 44

background image

10

a.

Remove the rod clevis lock pin

b.

Lift the rod

c.

Remove the rod from the pivot bracket

You can now access the mounting hole easily

4. Mount the pedals to the existing holes using the four (4)

provided M6x20 screws, four (4) washers, and four (4) nuts or
four (4) M6 slot nuts (depending on your rig).

If there are no holes available or they do not line up, you can
use the mounting hole schematics available here: www.asetek.
com/simsports/product/forte-pedals-brake-and-throttle/ or
continue to step 5:

5. Mark the drilling locations.

6. Remove the pedals and drill four (4) Ø6.4 mm holes.

7. Mount the pedals to the holes using the four (4) provided

M6x20 screws, four (4) washers, and four (4) bolts or M6 slot
nuts (depending on your rig).

Congratulations. You have successfully mounted your Asetek
SimSports™ Forte™ Pedals to your rig. Enjoy the ride!

Please be aware that edges on the rod clevis can be sharp

Note: If your rig is placed up against a wall, please make sure that
there are minimum 5 cm of air between the rear of the brake cylinder
and the wall, to avoid unnecessary friction between the two.

«
...
10
11
12
13
14
...
»

Summary of Contents for SimSports Forte P-BT-2













































Reviews:

No comments

Related manuals for SimSports Forte P-BT-2

Brand: T-Tech Pages: 38

Brand: 7AMEnfant Pages: 2

Brand: Hagan Pages: 32

My first Walker

Brand: Jamara Pages: 4

Brand: Jalousie-Welt Pages: 20

Brand: Jeda Pages: 8

Brand: Patton electronics Pages: 12

Brand: Q'STRAINT Pages: 10

Brand: Paso Pages: 29

Brand: Yeti Pages: 19

Brand: veba Pages: 11

Brand: Panasonic Pages: 72

AS5000 - Transcription Kit - Digital Voice...

Brand: Olympus Pages: 17

Brand: Öhlins Pages: 10

Brand: +GF+ Pages: 36

651665 00 22-00-40

Brand: hepco & becker Pages: 5

Brand: Thule Pages: 4

Brand: Sable Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands