Asetek SimSports Forte P-BT-2 Manual Download | Manualshive

Page: 35 / 44

background image

33

6. RaceHub™ Adjustments

All Asetek SimSports™ products come with an extremely
powerful yet easy-to-use piece of software that we have
developed from the ground up. It is called RaceHub™ and will
take care of your every need. RaceHub™ unlocks things you
would not dare to dream and is continuously updated.

6.1 RaceHub™ Download

RaceHub™ is available for download, in its newest version, on our
website: https://www.asetek.com/simsports/racehub/.

6.1.1 RaceHub™ Installation

After completing the download from our website, double-click
the downloaded file to initiate the installation. Follow the on-
screen instructions and install them in your desired directory.
Once installed, open RaceHub™ using the shortcut on your
desktop or in your programs folder.

6.1.2 RaceHub™ Updating

RaceHub™ will automatically notify you if there are available
updates for the software. If you want to double-check, please
go to www.asetek.com/simsports/racehub and download the
newest version.

RaceHub™ has a built-in feature that allows you to update the
firmware on your devices automatically.

6.2 Introduction

Asetek SimSports™ RaceHub™ allows you to make a plethora of
adjustments to your Asetek SimSports™ products. On the Forte™
pedals, it will allow you to adjust pedal maps, calibrate your
pedals, adjust the aRGB lighting, and much more.

Everything is available in a highly user-friendly interface that
allows for quick and easy customization that not only gives
you complete control but does it in a manner where you are
constantly in focus – teaching you everything you need to know
to become a power user and expert sim racer.

«
...
33
34
35
36
37
...
»

Summary of Contents for SimSports Forte P-BT-2













































Reviews:

No comments

Related manuals for SimSports Forte P-BT-2

Brand: Cane Creek Pages: 2

Brand: Hama Pages: 22

Brand: Camcar Pages: 6

Brand: Waters Pages: 21

Brand: FEIYUTECH Pages: 19

Brand: IDEAL Pages: 6

My first Walker

Brand: Jamara Pages: 4

Brand: Jalousie-Welt Pages: 20

Brand: JASTEC Pages: 12

Brand: parktool Pages: 2

Brand: Kargo Master Pages: 13

Brand: Kargo Master Pages: 21

Brand: Kargo Master Pages: 4

Brand: Karel Pages: 56

Brand: madebyzen Pages: 16

Brand: V-TAC Pages: 4

Brand: Harol Pages: 17

Brand: Cab Technology Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands