31
Plug the Type-C end into your pedals and the Type-A end into
your PC. Your PC will recognize the Asetek SimSports™ Forte™
pedals. Proceed to install the RaceHub™ and configure your
pedals to your liking (See section 5.3. for instructions).
If you connect an Asetek SimSports™ Direct-Drive wheelbase,
we suggest using the USB Type-C to USB Type-C cable, to
connect your pedals directly to your wheelbase.
Plug one end into your pedals and the other into your
wheelbase. Open RaceHub™ and configure your pedals to your
liking (See section 5. for instructions).
4.4 Start Racing!
Your pedals are ready for racing – even without adjusting them
in the software. From our factory, they are calibrated with a
maximum pressure of 100 bar, which is equivalent of 185 kilos of
pressure on the brake. The stock elastomer can be switched as
you desire – our recommended is the standard white medium.
Again – before changing anything, try to drive for several hours
and adapt to the feeling of a real race car.
Assign the pedals in your favorite simulator game, and you are
ready to go.
Summary of Contents for SimSports Forte P-BT-2
Page 1: ...1 Sim Racing Pedals Manual ...
Page 44: ...42 ...
