ASEM BM1 Series, User Manual

Page: 25 / 118

19 BM1xx User ’s guide
2.12.2.2 DL2 - Mass Storage Devices LED
The LED is switched on while data is transferred between the IPC and the SSD.
2.12.2.3 DL3 - Watchdog LED
This LED is used to notify that Watchdog timer has expired. In addition, depending on setting of SW1-4, as the Watchdog timer expires a
system reset may occur or not. DL3 LED may be reset to OFF state pressing the WD RST button.
2.12.2.4 DL4 - Thermal Alarm LED
This LED is used to notify a thermal alarm coming from inside BM1xx.
Measuring point Thermal limit
Mother board close to CPU 85°C
In case this LED is on, please shut off the system and check its cooling and power consumption.
2.12.3 Labels
On the side of the system the following label is present.
Marking label
Model
Disposal
CE marking
Electrical information
Serial number
1
1
2
3
4
5
1
1
2
3
4
5